Future of Centos and Enterprise Linux

The Red Hat changes in how they publish the source code for CentOS sent a stream specifically, but unlike all the other conversations that I’ve heard, we dive into how enterprises can inoculate themselves from this type of disruptive change. We also address what it means for the ecosystem of vendors and how we can build better software in response to the potential fragmentation of Red Hat, Linux Enterprise Linux or Enterprise Linux distros.

This was a surprising conversation, because we addressed a lot of important trends in how companies depend on Linux stability, and what they could do. If you are in this boat with all of us looking at how to have stable long term secure infrastructure using Linux, you will love this podcast.

Sources:
www.theregister.com/2023/07/10/orac…_ibm_rhel_code/
www.zdnet.com/article/oracle-tak…-linux-code-fight/
www.suse.com/news/SUSE-Preserve…-Enterprise-Linux/
www.zdnet.com/article/why-snap-a…-the-average-user/

Transcript: otter.ai/u/dmrcCulS0X1CC4YGHO…?utm_source=copy_url
Image: www.pexels.com/photo/photo-of-pe…de-table-3182755/

Announcing the Cloud 2030 Online Community/Event

Rob Hirschfeld and Stephen Spector announce the launch of a new community/event called Cloud 2030. This concept is based on the past Cloud 2020 event held at Switch in 2010 focused on the future of cloud.

In addition to being a global community of cloud operators this will operate as en event without a fixed schedule. Come join at cloud2030.mn.co to learn more.

Yadin Porter de León on critical open source community failings

Joining us this week is Yadin Porter de León (@porterdeleon), IT Community at Druva as well as from the Level Up Project and host of the Tech Village podcast.

Highlights
” Open Source Communities and the People
” Relationship of Corporations in Open Source and Community
” Users of Open Source care about Community?
” Community’s should FOCUS and not overlap to adjacencies

Open Source Collaboration: The Power of No

TL;DR: The days of using open software passively from vendors are past, users need to have a voice and opinion about project governance. This post is a joint effort with Rob Hirschfeld, RackN, and Chris Ferris, IBM, based on their IBM Interconnect 2017 “Open Cloud Architecture: Think You Can Out-Innovate the Best of the Rest?” presentation.

nullIt’s a common misconception that open source collaboration means saying YES to all ideas; however, the reality of successful projects is the opposite.

Permissive open source licenses drive a delicate balance for projects. On one hand, projects that adopt permissive licenses should be accepting of contributions to build community and user base. On the other, maintainers need to adopt a narrow focus to ensure project utility and simplicity. If the project’s maintainers are too permissive, the project bloats and wanders without a clear purpose. If they are too restrictive then the project fails to build community.

It is human nature to say yes to all collaborators, but that can frustrate core developers and users.

For that reason, stronger open source projects have a clear, focused, shared vision. Historically, that vision was enforced by a benevolent dictator for life (BDFL); however, recent large projects have used a consensus of project elders to make the task more sustainable. These roles serve a critical need: they say “no” to work that does not align with the project’s mission and vision. The challenge of defining that vision can be a big one, but without a clear vision, it’s impossible for the community to sustain growth because new contributors can dilute the utility of projects. [author’s note: This is especially true of celebrity projects like OpenStack or Kubernetes that attract “shared glory” contributors]

There is tremendous social and commercial pressure driving this vision vs. implementation balance.

The most critical one is the threat of “forking.” Forking is what happens when the code/collaborator base of a project splits into multiple factions and stops working together on a single deliverable. The result is incompatible products with a shared history. While small forks are required to support releases, and foster development; diverging community forks can have unpredictable impacts for a project.

Forks are not always bad: they provide a control mechanism for communities.

The fundamental nature of open source projects that adopt a permissive license is what allows forks to become the primary governance tool. The nature of permissive licenses allows anyone to create a new line of development that’s different than the original line. Forks can allow special interests in a code base to focus on their needs. That could be new features or simply stabilization. Many times, a major release version of a project evolves into forks where both old and newer versions have independent communities because of deployment inertia. It can also allow new leadership or governance without having to directly displace an entrenched “owner”.

But forking is expensive because it makes it harder for communities to collaborate.

To us, the antidote for forking is not simply vision but a strong focus on interoperability. Interoperability (or interop) means ensuring that different implementations remain compatible for users. A simplified example would be having automation that works on one OpenStack cloud also work on all the others without modification. Strong interop creates an ecosystem for a project by making users confident that their downstream efforts will not be disrupted by implementation variance or version changes.

Good Interop relieves the pressure of forking.

Interop can only work when a project defines what is expected behavior and creates tests that enforce those standards. That activity forces project contributors to agree on project priorities and scope. Projects that refuse to define interop expectations end up disrupting their user and collaborator base in frustrating ways that lead to forking (Rob’s commentary on the potential Docker fork of 2016).

nullUnfortunately, Interop is not a generally a developer priority.

In the end, interoperability is a user feature that competes with other features. Sadly, it is often seen as hurting feature development because new features must work to maintain existing interop standards. For that reason, new contributors may see interop demands as a impediment to forward progress; however, it’s a strong driver for user adoption and growth.

The challenge is that those users are typically more focused on their own implementation and less visible to the project leadership. Vendors have similar disincentives to do work that benefits other vendors in the community. These tensions will undermine the health of communities that do not have strong BDFL or Elders leadership. So, who then provides the adult supervision?

Ultimately, users must demand interop and provide commercial preference for vendors that invest in interop.

Open source has definitely had an enormous impact on the software industry; generally, a change for the better. But, that change comes at a cost – the need for involvement, not just of vendors and individual developers, but, ultimately it demands the participation of consumers/users.

Interop isn’t naturally a vendor priority because it levels the playing field for all vendors; however, vendors do prioritize what their customers want.

Ideally, customer needs translate into new features that have a broad base of consumer interest. Interop ensure that features can be used broadly. Thus interop is an important attribute to consumers not only for vendors, but by the open source communities building the software. This alignment then serves as the foundation upon which (increasingly) that vendor software is based.

Customers should be actively and publicly supportive of interop efforts of projects on which their vendor’s offerings depend. If there isn’t such an initiative in those projects, then they should demand one be started through their vendor partners and in the public forums for the project.

Further, if consumers of an open source project sense that it lacks a strong, focused, vision and is wandering off course, they need to get involved and say so, either directly and/or through their vendor partners.

While open source has changing the IT industry, it also has a cost. The days of using software passively from vendors are past, users need to have a voice and opinion. The need to ensure that their chosen vendors are also supporting the health of the community.

What do you think? Reach out to Rob (@zehicle) and Chris (@christo4ferris) and let us know!

Note: Cross posted on IBM OpenTech site.

Accelerating Community Ops on Kubernetes in Hybrid Style

Preface: RackN is looking for SRE teams who are enthusiastic about accelerating Kubernetes on-premises in a long term operational way that can be shared and reused across the community.

kubernetesWe’re excited to see and be part of the community progress towards enterprise-ready Kubernetes operations on both cloud and on-premises.  The RackN team is excited to be part of multiple groups establishing patterns with shareable/reusable automation. I strongly recommend watching (or, better, collaborating in) these efforts if you are deploying Kubernetes even at experimental scale.

We’ve worked hard to make shared community ops work accessible, repeatable and multi-platform without compromising scale or security.

The RackN team has been enthusiastic supporters of Kubernetes since the 1.0 launch with our first deployments going back to June 2015 with updates for 1.2, 1.3 and now 1.5. I’m excited to report that fully converged the composable Digital Rebar approach with the Kubernetes Kargo Ansible. Our 1.2 efforts leveraged the Kargo predecessor “Kubespray.” This integration brings the parallel hybrid operation and node-by-node function of Digital Rebar with the Ansible community efforts around Kargo.

Composable design is a key element the RackN focus on SRE automation because it allows ecosystem

That allows a fully integrated deploy where Digital Rebar stages the environment and then use Kargo directly from upsteam to install Kubernetes. Post-deployment, Digital Rebar is able to extend the cluster with packages like Helm, Deis, Dashboard and others.

Since Digital Rebar supports parallel deployments, it’s possible to fully exercise the options enabled by Kargo simultaneously for development and testing.  Benefits????

For example, you can built-test-destroy coordinated Kubernetes installs on Centos, Redhat and Ubuntu as part of an automation pipeline. Unlike client side approaches like Terraform or Ansible, our infrastructure allows transparent monitoring of the deployments including Slack integration.

Flexibility is also important between users because Ops variation is both a benefit and a cost.

A key Digital Rebar design goal is for users to explore useful variation and still share operational best practices. We are proving that shared community automation can support many different scenarios including variation between between clouds, physical, operating system, networking and container engine.

If we cannot manage this variation in a consistent way then we’re doomed to operational fragmentation (like OpenStack has endured).

We’re inviting you to check out our open work supporting the Kubernetes Ops community. As Rob Hirschfeld says, looking for “Day 2” minded operators who want to make sure that we are always able to share Kubernetes best practices.